To meet our customer’s needs, we can supply our products with different finishes:
  • Thermofixed treatment: a process that leads to all the fibres working in unison.
  • Coating: a process that increases the rope’s resistance to rubbing.
  • Spliced ends: which can be supplied in a polyester or leather protection.
  • Shackles.
  • Thimbles

Double braided splice loop

12/16 strands splice loop

1. Mark an "X" in the core.
Extract the core pulling from the cover through the point X.

2. At position B the cover is inserted into the core and vice versa, at position C the cover is extracted through the core.

3. From position B to D the core is inside the cover, until it is extracted through position A.

4. Position B is run along it coincides with position A. The loop is finished.

1. We introduce one of the ends of the halyard through the points A B C D respecting a distance of 4 to 6 stages between these points.
The recommended distance between points D-E is 50 times the nominal diameter.

2. Equal the extrems of the halyard to reach the desired loop. With a small cord and a needle make a few sews to tie the halyard to avoid the movement of the loop.

3. The loop is finished.

Eye splice for 3 strands rope

Eye splice for 8 strands rope

Folch Ropes, SA - Ctra. B-510 km 9,3, Apdo. correos nº1 08450 - Tel. +34 938 412 445 - Llinars del Vallès (Barcelona)
_POLITICA_COOKIES_TEXT